A unit turnover has a cleaning list, a painting list and a repair list. The access list is usually one sentence: get the keys back. That sentence misses most of what the outgoing tenant can still open, because a rental hands out credentials in several formats and only one comes back in an envelope.
Step 1: Inventory the credentials, not the keys
Write down every way into the unit and the building before you ask for anything back. A scattered-site portfolio usually has more credential types than the owner remembers issuing.
- Unit door keys, including any the tenant cut for a partner, a cleaner or a dog walker.
- Common door fobs, cards or building keys, issued by count and tracked in a panel rather than on paper.
- Garage remotes and gate codes, where one shared code often serves every unit.
- Smart lock PINs and app users, which sit in a phone account you may not control.
- Mail and parcel room keys, usually held by Canada Post or a locker vendor rather than by you.
- Lockbox and contractor codes set during the last turnover and never changed since.
One distinction runs through the job. A key is a physical object, so collecting it ends that copy and nothing else. A fob, a card, a PIN and an app user are database records. Collecting the plastic changes nothing until you delete the record.
Step 2: Know which rule you are under
Changing a lock during a tenancy and changing one between tenancies run on different rules, and the provinces do not agree on the mid-tenancy test.
Ontario. Section 24 of the Residential Tenancies Act, 2006 says a landlord shall not alter the locking system on a door giving entry to a rental unit or residential complex, or cause it to be altered, during the tenant's occupancy without giving the tenant replacement keys. Consent is not the test. Replacement keys are.
Alberta. Section 24(1) of the Residential Tenancies Act makes consent the test in both directions: neither a tenant nor a landlord may add to or change locks without the consent of the other. Subsection (2) then lets a landlord change locks anyway if a key is made available to the tenant as soon as the change is made.
British Columbia. Section 31(1.1) of the Residential Tenancy Act sets the highest bar of the three: a landlord must not change locks or other means of access to a rental unit unless the tenant agrees and the landlord provides new keys or other means of access. Both conditions, not either one.
Read the wording, not the summary. British Columbia says "locks or other means of access," which reaches a fob and a code. Ontario says "locking system." Alberta says "locks" and "a key." Those texts were drafted around brass, so treat a fob deactivation during a tenancy the way you would treat a lock change. The effect on the tenant is the same.
In Ontario this is not only a Board matter. Section 233 makes it an offence to knowingly alter a locking system in a manner that contravenes section 24, and section 238 sets the maximum fine at $100,000 for a person and $500,000 for a corporation.
Step 3: Rekey at the end of the old tenancy, not the start of the new one
Once the tenancy has ended and the unit is empty, the mid-tenancy restrictions no longer apply, and in British Columbia there is a direct reason to act inside that window. Section 25 lets a tenant at the start of a new tenancy require the landlord to rekey the locks, at the landlord's cost, so that keys or other means of access given to the previous tenant no longer work. Subsection (2) says that if you already did it at the end of the previous tenancy, you need not do it again.
The cheaper version of this job is the one you schedule with the turnover trades already on site, not the one a new tenant asks for in week one. Fold it into the turnover work you start before the unit empties.
Step 4: Run the changeover in this order
- Pull the credential list from every system, not from memory. The fob panel, the smart lock app and the gate controller each hold their own list.
- Deactivate fobs, cards and app users by record, on the day the tenancy ends, whether or not the plastic came back.
- Clear every PIN issued for this tenancy, including the one you gave a contractor and the one the tenant set for a family member.
- Rekey or replace the unit cylinder, and keep the old core until any deposit question is settled.
- Change shared codes the outgoing tenant knew. A garage code one tenant knows is a code the building shares.
- Reset mail and locker access through the vendor, usually Canada Post for a community mailbox and the supplier for a parcel room. Neither is immediate, so start before the move-out date.
- Issue new credentials under the new tenant's name, with a count, and have the tenant sign for that count.
- Record the serial or record number of everything you issue. A fob you cannot name in the panel is a fob you cannot deactivate later.
The record that makes the next turnover quick
One line per credential, filed with the lease rather than in a maintenance log. Six fields: credential type, identifier, date issued, who signed for it, date deactivated, who deactivated it. The identifier is the field people skip, and it is the one that turns a changeover from a search into a task.
Three ways this goes wrong
The credential nobody issued. Tenants cut keys, and no statute obliges them to say how many. That is why the rekey between tenancies matters more than the key count at move-out: the count can be honest and still be wrong.
The app account that leaves with the trade. If a smart lock was installed by a contractor using their own account, the administrator is the contractor, not you. Confirm who holds the owner role on every lock before you need to remove someone.
The access history you did not check. Fob panels keep entry logs, and that log is sometimes the only record of who was in a common area on a given night. Find out how long yours retains it before an incident, not during one, and treat the log as tenant data.
None of this takes long once the list exists. The work is building it the first time, for units with no record of what went out.
